Hire Indian Welders for the Czech Republic
MIG/MAG, TIG and manual-arc welders and fitter-fabricators for Czech engineering and metal workshops — tested on your joint, material and position before you commit a vacancy.
Welding Skill You Can Verify Before Arrival
Welding is the trade where a CV says least. A candidate who has welded for ten years in a Gulf fabrication yard may be excellent on carbon-steel fillet welds and untested on thin stainless with TIG. For a Czech workshop that will tie an employee card to that person’s vacancy, the only sensible approach is to test on your work before selection.
In Czech practice, welder qualification testing is carried out to ČSN EN ISO 9606, the Czech adoption of the European standard (part 1 covers fusion welding of steels), through accredited certification bodies; basic welding courses to ČSN 05 0705 also exist. Indian certificates are useful evidence, but plan for your customer’s or your own quality system’s requirement for European qualification after arrival, and say so in the contract.
A good test brief is short and specific: the welding process numbers you use, base material and thickness, joint type and welding position, any filler you specify, and the acceptance level your inspectors apply. Add a drawing-reading task and a simple fit-up exercise if the role includes preparation and assembly. Candidates who perform well under those conditions are worth the vacancy; candidates who only describe experience are not yet proven.
Roles We Deploy
How to De-risk Welder Hiring From India
- Specify process, material, thickness and position — the test is built from that, not from a generic trade list
- Test coupons are welded under observation and recorded on video so your welding engineer can judge them
- Drawing reading and fit-up are checked separately from welding, because many workshop roles need both
- Plan certification to the European standard after arrival if your customers or quality system require it
- Welders are recruited only through an MEA-registered process with documented results for each candidate
From Weld Specification to Workshop
Processes, base materials, thicknesses, positions and any WPS you work to; plus shift pattern and wage.
Positions are reported to Úřad práce and the planned hires are put to the Qualified Employee guarantor.
Candidates weld test pieces to your brief; visual results and recordings go to your team with each profile.
Selected welders apply in New Delhi. After arrival you arrange safety induction and any certification to the European standard your work requires.
Pay, Conditions & Timeline
Welders’ pay is set by the employer and must match the reported vacancy; we do not quote market rates. If certification to the European standard is needed, decide in advance who pays for the test and whether the worker is on full pay while it is arranged, and write that into the contract.
One to three months is our typical European range from a complete file to arrival. Programme capacity, embassy appointments and the Ministry’s decision set the actual pace; testing in India can run in parallel with programme entry.
Before arrival, plan the first weeks: safety induction, familiarisation with your equipment and consumables, and — if needed — booking the qualification test with an accredited body. Put new welders on supervised work first and review their results with your welding coordinator. Accommodation close to the workshop and clear information about rent deductions remove the most common reasons for early resignations.
Figures are indicative market ranges and not a quotation; the signed service agreement governs. See our Terms & Conditions.
Employer FAQs
Are Indian welding certificates valid in the Czech Republic?
They show training and experience, but your customers or quality system may require qualification to the European standard (ČSN EN ISO 9606). Plan that test with an accredited body after arrival.
Can you test on stainless steel or aluminium?
Yes, if you specify it. The test is designed around your material, thickness, process and position.
Can welders work on site outside the Czech Republic?
The employee card authorises work in the Czech Republic for the registered vacancy. Posting to another EU country is a separate legal question that needs advice before you plan it.
What housing should we provide?
Proof of accommodation is part of the employee-card application. Most workshops arrange shared housing near the plant and state any rent deduction in the contract.
Do Indian workers need emigration clearance for the Czech Republic?
No. The Czech Republic is not one of the countries on India’s Emigration Check Required (ECR) list, which covers mainly Gulf and some Asian states. ECR emigration clearance therefore does not apply in the way it does for Gulf hiring; workers travel on their passport and the visa or permit issued by the Czech Republic.
Which programme covers welders?
Welding and metal-fabrication trades fall within CZ-ISCO class 7, which is covered by the Qualified Employee programme for which Indian nationals are eligible.
What should a test brief include?
Process, base material and thickness, joint type, position, filler and the acceptance level you apply. Add drawing-reading and fit-up tasks if the job requires them.
Related Guides
More Hiring in Czech Republic
Send Us Your Weld Specification
Send us the roles, numbers and start date. You get a scoped proposal with timeline and all-inclusive per-worker cost.